We have stumbled on this article involving What Would Cause My Electric Water Heater to Stop Working? listed below on the web and believe it made good sense to write about it with you in this article.
Lots of modern homes use an electrical water heater for their heating unit, because of its comfort and ease of use. Nevertheless, much like any other electric devices, troubles may occur with its use, all of a sudden. It can be really frustrating to wake up to a cold shower instead of a hot one or having your bath with water that isn't hot sufficient and even as well warm. Whatever the situation might be, hot water heater troubles can be fairly aggravating. The good news is, we have actually made a checklist of feasible remedies to your hot water heater problems. There are a variety of aspects that might trigger a number of these issues, maybe a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, guarantee you switch off the major power supply for security. Whatever the issue is, getting it taken care of ought to not position excessive of an issue if you follow these steps:
Call A Professional:
If after changing all damaged components as well as resetting your temperature, the water heater still isn't working, you might require to call a professional plumber for a professional opinion. The trouble with your heating system could be that the hot and cold taps have actually been changed or it may be undersized for the amount of warm water required in your house. Whatever the situation may be, a specialist plumber would certainly assist resolve the problem.
Examine Your Power Supply:
As fundamental as this may seem, it is really needed. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the breaker stumbled. If the breaker is the problem, simply turn it on and off once again. Replace any busted or damaged fuse. Check the appliance with power after these adjustments to see if it's currently working.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to inspect the temperature settings on your top thermostat. Guarantee the circuit breaker is switched off before doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This should aid heat up the water. Turn the breaker back on as well as check if the trouble has been solved.
Check the Burner in the Water Heater:
If it's not a power problem, after that try looking into your heating element if it is still functioning. Check each of your heating elements to ensure the problem isn't with any one of them. If any of them is faulty, change that part and afterwards check whether the warm water is back on.
Final thought
Hot water heater troubles are not always significant. A number of them are due to small issues like a blown fuse or damaged burner. Replacing the defective components need to do the trick. Nevertheless, if you are still incapable to solve the problem, give a call to your nearby plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Do you enjoy reading up on What Would Cause My Electric Water Heater to Stop Working?? Place a remark further down. We would be interested to hear your ideas about this blog post. Hoping that you visit us again in the future. Loved our content? Please share it. Help someone else discover it. Thank you for your time. Visit again soon.
Book A Free Estimate